ETCR6800D AC/DC Clamp Leaker - Digital Clamp Meter for Electrical Current Testing, Voltage Measurement - Perfect for Electricians, HVAC Technicians & DIY Home Electrical Projects

Function: Measure AC/DC current, peak hold, online monitorSize of clamp: Φ68mmRange DC:0.0A~2000A AC:0.0A~1500AAccuracy: ±2%rdg±3dgtResolution: 0.1ADimension: 224mm×115mm×43mmData interface: USBWeight: 515g(with battery)Power Supply: Zn-Mn dry battery 6F22 9V, lasting for100hoursTest Mode: Clip-on CT, noncontact modeDisplay Mode: Four digits LCD displayLCD Dimension: 35mm×21.5mm; display domain: 32mm×15mmFrequency: AC 45Hz~400Hz Sampling Rate: 2 times/sPolarity Indication: DC current auto identified and display“—”Test Position: Tested wire in the jaw center; Error will increase to 1.5%rdg max if deviate the centerRange Shift: AutomaticallyLine Voltage: AC600VSoftware with the software the data can upload to computerData Memory: 99units, FULL blinks when the memory is fullPeak Hold: Push HOLD without release, the meter will show the peak value during the pushing periodReading Hold: DH indicating the reading is holdOut of Range: OL indicating the current is out of rangeAuto Power-off: 5 Minutes after power on, it will power off automatically to lower the power consumptionBattery Voltage: Indicating the battery voltage is lower than 7.2V.Then the battery have to be changedConsumption: 10mWTemperature and Humidity: -10℃~50℃; Below 80%rhMax error refer to environment: -10℃~0℃,40℃~50℃,Error will increase max to 1%rdgTemperature and Humidity for storage: -10℃~60℃,below 70%rhInsulating Strength: AC2kV/rms. (between the alloy of the clamp and the housing)Applicable safety rules: IEC1010-1, IEC1010-2-032, Pollution level 2, CAT Ⅲ(600V)Accessories Meter: 1pc; USB communication line: 1pc; software: 1pc; battery (6F22 9V):1pc.